Ducting & Vents > 125mm Ducting

Product Range

system 100 - 4" 125 to 100mm reducer collar
This ducting reducer collar is used from the cooker hood motor housing and reduces the ducting from 125mm to 100mm in diameter, this reducer should only be used on kitchen extractors that state 4" ducting can be used, please also note that Luxair recommend that you read our fitting instructions on each product if you are unsure if this is the correct part.
£4.00
system 150-6 150mm to 125mm ducting reducer collar
This reducer collar is used to reduce the ducting size from 6" to 5" ( 150mm to 125mm) it is normally used as a connector from the top of the motor housing spigot to round 125mm ducting, you can also use this reducer collar to connect round to flat ducting pipes
£4.00